Cubic liquid crystals containing propolis flavonoids as in situ thermo-sensitive hydrogel depots for periodontitis treatment: Preparation, pharmacodynamics and therapeutic mechanisms.

Propolis has a long ethnopharmacological history for oral periodontal diseases treatment. Propolis flavonoids are main active components for anti-inflammation and tissue protection. However, the intractable dissolution properties of propolis flavonoids and complex oral environment pose great challenges for periodontal delivery. In addition, the therapeutic mechanism as well as the therapeutic correlation of inflammation resolution and tissue regeneration remain unclear for propolis flavonoids. In this study, we constructed an in situ thermosensitive depot systems using total flavonoids from propolis-loaded cubic liquid crystals (TFP-CLC) hydrogel for periodontal delivery. TFP-CLC inhibited inflammatory cell infiltration, reactive oxygen species and the expression of inflammatory cytokines of NF-κB and IL-1ß. In addition, alveolar bone and collagen were significantly regenerated after TFP-CLC administration according to micro-CT and immunohistochemistry. Mechanism studies suggested that TFP-CLC alleviated inflammation and promoted alveolar bone repair via regulating TLR4/MyD88/NF-κB p65 and RANK/NF-κB signaling pathways, respectively. Correlation analysis further confirmed that the inflammatory resolution produced by TFP-CLC could accelerate periodontal tissue regeneration. In summary, TFP-CLC is a promising multifunctional in situ thermo-sensitive hydrogel depots for periodontitis treatment.

SAR study culminates in a series of HDAC6 selective inhibitors featuring Schisandrin C-analogous Cap as potential immunomodulatory agents for cancer therapy.

HDAC6 inhibitors (HDAC6is) represent an emerging therapeutic option for triggering anti-cancer immune response. In this work, a novel series of HDAC6is, derived from an in-house analog of the traditional Chinese medicine monomer Schisandrin C, were designed and synthesized for SAR study. Throughout the 29 target compounds, 24a, 24b and 24h exerted single-digit nanomolar enzymatic activity and remarkably elevated subtype selectivity compared to the clinically investigated HDAC6i Ricolinostat (Selectivity index = 3.3). In A549 tumor cells, 24h, as the representative in this series (IC50 = 7.7 nM; selectivity index = 31.4), was capable of reversing IL-6-mediated PD-L1 upregulation, highlighting its immunomodulatory capability. Importantly, unlike numerous other hydroxamate-based HDACis, 24h displayed an acceptable oral bioavailability in Sprague-Dawley rats, along with high plasma exposure, long elimination half-life and slow clearance. With the aforementioned attractive performance, 24h deserves further in vivo investigation as an immunomodulatory therapeutic agent for batting human malignance.

Sorafenib-Loaded PLGA-TPGS Nanosystems Enhance Hepatocellular Carcinoma Therapy Through Reversing P-Glycoprotein-Mediated Multidrug Resistance.

Multidrug resistance (MDR) is a key determinant for hepatocellular carcinoma chemotherapy failure. P-glycoprotein is one of the main causes of MDR by causing drug efflux in tumor cells. In order to solve this thorny problem, we prepared a sorafenib-loaded polylactic acid-glycolic acid (PLGA) - D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) nanoparticles (SPTNs). SPTNs were successfully synthesized through an ultrasonic emulsion solvent evaporation method with a favourable encapsulation efficiency of 90.35%. SPTNs were almost spherical in shape with uniform particle size (215.70 ± 0.36 nm), narrow polydispersity index (0.27 ± 0.02) and negative surface charge (-26.01 ± 0.65 mV). In the cellular uptake assay, the intracellular coumarin-6 (C6) fluorescence of TPGS component-based PLGA nanoparticles (C6-PTNs) was 1.63-fold higher relative to that of PVA component-based PLGA nanoparticles (C6-PVNs). The half-maximal inhibitory concentration and apoptosis ratio of SPTNs against HepG2/MDR cells were 3.90 µM and 75.62%, respectively, which were notably higher than free SF and sorafenib-PLGA-PVA nanoparticles (SPVNs). The anti-drug efflux activities of SPTNs were assessed by the intracellular trafficking assay using verapamil as a P-gp inhibitor. SPTNs could effectively inhibit the drug efflux in tumor cells detected by flow cytometry, and suppressed relative MDR1 gene as well as P-glycoprotein expression in tumor cells. Attributed to the MDR reversion effect of SPTNs, the in vivo antitumor efficacy experiment showed that SPTNs significantly inhibited the tumor growth of HepG2/MDR xenograft-bearing nude mice, and obviously reduced the toxicity against liver and kidney compared with SF treatment. In summary, SPTNs, as highly efficient and safe antitumor nano delivery systems, showed promising potential for hepatocellular carcinoma therapy through reversing P-glycoprotein-mediated MDR. Graphical Abstract.

Reviewing Propolis with Multi-components in the Treatment of Oral Diseases through Multi-pathways and Multi-targets.

Propolis is a natural product made from the mixture of plant resin, saliva and wax collected by bees. It has been studied and concerned because of its high medicinal value and broad application prospects. Propolis has complex components, which can act on the body through multi-pathways and multi-targets to play the role of antibacterial, anti-inflammatory, anti-tumor and so on, and it can be used as an important resource for the prevention and treatment of oral diseases. In this review, we mainly reviewed components of propolis and its physiological activities against oral diseases, as well as the new dosage forms and applications of propolis in oral treatment. The purpose of this review is to explore the advantages of propolis in the treatment of oral diseases and the wide application of propolis in the field of oral health.

Polyvinylpyrrolidone microneedles for localized delivery of sinomenine hydrochloride: preparation, release behavior of in vitro & in vivo, and penetration mechanism.

Sinomenine (SIN) is an anti-inflammatory alkaloid derived from Sinomenium acutum, and the products sinomenine hydrochloride (SH) tablets and injections have been marketed in China to treat rheumatoid arthritis (RA). Oral administration of SH has shortcomings of gastrointestinal irritation and low bioavailability. The injection may require professional training and higher cost. It is of interest to develop an alternative form that is easier to administer and avoids the first-pass metabolism. In this study, SH-loaded dissolving microneedles (SH-MN) were fabricated using polyvinyl pyrrolidone and chondroitin sulfate with a casting method. In percutaneous permeation studies of In vitro, the cumulative permeation and permeation rate of SH-MN were 5.31 and 5.06 times higher than that of SH-gel (SH-G). In percutaneous pharmacokinetic studies, the values of the area under the curve after administration of SH-MN in the skin and blood were 1.43- and 1.63-fold higher than that of SH-G, respectively. In percutaneous absorption studies, SH-MN could absorb into tissue fluid; and dissolve after skin penetration. The drug was released along the channel and spread to surrounding skin tissue. After 4 h, the needle tip was almost completely dissolved, and the drug could penetrate to a depth of 200 µm under the skin. These results demonstrate that the SH-MN is an effective, safe, and simple strategy for transdermal SH delivery.

Facile nose-to-brain delivery of rotigotine-loaded polymer micelles thermosensitive hydrogels: In vitro characterization and in vivo behavior study.

A rotigotine (ROT)-loaded polymer micelles thermosensitive gel (ROT-PM-TSG) delivery system was engineered to enhance the solubility of the drug, prolong the residence time, and increase the concentration of the drug in the brain tissue. First, ROT-loaded polymer micelles (ROT-PM) were tailored and optimized. The average particle size, encapsulation efficiency, and drug loading of the ROT-PM were (88.62 ± 1.47) nm, (93.5 ± 0.79) %, and (19.9 ± 0.60) %. The optimal ROT-PM-TSG formulation contained 22% P407 and 2% P188 with a gelation temperature of about 32.3 °C and a pH of 5.186. In vivo, the MRT of ROT-PM and ROT-PM-TSG nasal administration was 1.43 and 1.79 times extended than that of the intravenous. In comparison with the intravenous group, the distribution of ROT in olfactory bulb, cerebrum, cerebellum and striatum was 276.6%, 170.5%, 166.5% and 184.4%, respectively. In conclusion, the ROT-PM-TSG system has proven to be a potential application prospect as a ROT nose-to-brain delivery system.

Development and Evaluation of Minocycline Hydrochloride-Loaded In Situ Cubic Liquid Crystal for Intra-Periodontal Pocket Administration.

In the present study, an injectable in situ liquid crystal formulation was developed for local delivery of minocycline hydrochloride (MH) for chronic periodontitis treatment. The physicochemical properties, phase structures, in vitro drug release and pharmacodynamics of in situ liquid crystals were investigated. The optimal formulation (phytantriol (PT)/propylene glycol (PG)/water, 63/27/10, w/w/w) loaded with 20 mg/g MH was proved to be injectable. The precursor formulation can form a cubic phase gel in excess water in 6.97 ± 0.10 s. The results of in vitro drug release suggested the MH presented a sustained release for 4 days. Liquid crystal precursor formulation significantly reduced gingival index, probing depth and alveolar bone loss compared to the model group (p < 0.01). Besides, the pathological characteristics of model rats were improved. The results suggested that MH-loaded in situ cubic liquid crystal possessed of sustained release ability and periodontal clinical symptoms improvement. The developed in situ cubic liquid crystal may be a potentially carrier in the local delivery of MH for periodontal diseases.

An injectable in situ hexagonal mesophase system for local delivery of minocycline hydrochloride: Preparation and pharmacodynamics in rats.

In this study, an optimized in situ reversed hexagonal mesophase loaded with minocycline hydrochloride (MH) was developed for the chronic periodontitis treatment. The in situ hexagonal liquid crystals (ISH2) comprised phytantriol (PT), propylene glycol (PG), water and vitamin E acetate (VitEA). The physicochemical properties, in vitro drug release and the therapeutic effects on chronic periodontitis of the formed samples were tested. The injectable liquid crystal-forming systems were characterized by crossed-polarized light microscopy, small angle X-ray scattering, and rheological measurements. The optimal ISH2 (PT/PG/water/VitEA, 56:27:10:7, w/w/w/w) loaded with 20 mg·g-1 MH was proved to be injectable with suitable pH, and was able to sustain the drug release for 10 days. The pharmacodynamic studies of the optimal formula were performed on male SPF rats, the Periocline® ointment was used as a control. The investigated ISH2 loaded with MH was demonstrated to be effective for periodontal treatment with significantly improved gingival index, pocket depth and alveolar bone loss. The developed ISH2 may be a promising application for local delivery system of MH in treating periodontal diseases.

Phytantriol-based in situ liquid crystals with long-term release for intra-articular administration.

The purpose of this study was to develop an injectable in situ liquid crystal formulation for intra-articular (IA) administration, and in situ forming a viscous liquid crystalline gel with long-term release of sinomenine hydrochloride (SMH) upon water absorption. The pseudo-ternary phase diagram of phytantriol (PT)-ethanol (ET)-water was constructed, and isotropic solutions were chosen for further optimization. The physicochemical properties of isotropic solutions were evaluated, and the phase structures of liquid crystalline gels formed by isotropic solutions in excess water were confirmed by crossed polarized light microscopy (CPLM) and small-angle X-ray scattering (SAXS). In vitro drug release studies were conducted by using a dialysis membrane diffusion method. The optimal in situ cubic liquid crystal (ISV2) (PT/ET/water, 64:16:20, w/w/w) loaded with 6 mg/g of SMH showed a suitable pH, showed to be injectable, and formed a cubic liquid crystalline gel in situ with minimum water absorption within the shortest time. The optimal ISV2 was able to sustain the drug release for 6 days. An in situ hexagonal liquid crystal (ISH2) system was prepared by addition of 5% vitamin E acetate (VitEA) into PT in the optimal ISV2 system to improve the sustained release of SMH. This ISH2 (PT/VitEA/ET/water, 60.8:3.2:16:20, w/w/w/w) was an injectable isotropic solution with a suitable pH range. The developed ISH2 was found to be able to sustain the drug release for more than 10 days and was suitable for IA injection for the treatment of rheumatoid arthritis (RA).